White Paper  
Home   Company   Solutions   Products   Sales   Services   Support
 
 
 
  How WebMux™ health check works?


Setup

  • A simple web server setup consists of a router and a web server like the figure below.

without load balancer

When the server is overloaded, the response will be very slow and if the web server is down for any reason, the entire web site becomes unavailable.

  • The solution is to use a WebMux™ setup as shown by the animated figure below. A WebMux is controlling a group of web servers called a web array or web farm. To the outside world the entire web farm acts as one web server.

load balancing

Operation

  • During normal operation, WebMux directs the web access load according to the configurations.
  • If one of the web servers within the farm is down for any reason, WebMux will bypass the failed server and page the operator. The load will be shared with the remaining servers. As long as at least one server within the farm is up and running, the web site is operational to the outside world.
  • When the failed server is recovered, WebMux detects its presence automatically. It will share the workload again with the rest of the farm.

A Secondary WebMux

  • The figure below shows a configuration of two WebMuxes.

load balancing

  • One of the WebMuxes is setup as primary and the other secondary. During normal operation, the primary is directing the web request traffic.
  • The secondary checks the primary periodically. If the primary goes down and does not respond, the secondary takes over.
  • Even after the fail over, the secondary continues to check the primary. Should the primary recover, the secondary relinquishes control back to the primary.

 
 
 
Contact us   Jobs   Press   Privacy   Terms of use
 
 
Copyright © 1987- CAI Networks, Inc. Copyright © 1998-2000 Red Hill Networks, Inc. All rights reserved.